Description

MILWAUKEE MC720 PH CONTROLLER KIT

The MC720 Milwaukee pH controller and dosing pump set, keeps the pH at a value set by you which is adjustable between 5.5 and 9.5. If necessary the controller will adjust the pH up or down by using pH+ Plus or pH- Minus solution.

The Milwaukee MC720 Kit consists of the MC122 pH Smart controller and Milwaukee MP810 Dosing pump, both especially designed for use in aquariums and hydroponics.

With Milwaukee's Smart controllers you can monitor and control pH and/or ORP levels directly in your aquarium or hydroponic system.All our controllers work with a 12 VDC adapter and can be hung above your aquarium, nutrient container or hydroponics system. The meters have a user selectable set point and a visual LED alarm that is active when the reading is higher (for pH) or lower (for mV) than the set point. Also the instruments are supplied with a power plug for CO2 or ozone dosing.

Specifications MC122 pH controller

• Range: 0.0 to 14.0 pH;
• Resolution: 0.1 pH;
• Accuracy: + / - 0.2 pH at 25 °C;
• Calibration: Manual 2 points;
• Controll Value: 5.5 to 9.5 pH;
• Dosing pump output: Active when the pH value is above or below the set point for pH;
• Visual LED alarm;
• Power supply: 2A -> 115v 60Hz / 1A -> 230v 50Hz;
• pH electrode: MA911B / 2 Double junction pH electrode (BNC connector);
• Setting Climate: 0 ° C to 50 ° C / 0 to 95% RH;
• Power plug for dosing pump or CO2 dosing;
• Power supply: 12V DC adapter included;
• Dimensions: 148.5 x 82.5 x 32 mm;
• Weight: 180 grams.

Specifications MP810 dosing pump

• Dosing volume: 1.5 L / hr (25 cc per minute);
• Adjustable: No;
• Maximum pressure: 1 bar;
• Housing material: Polipropileen (PP);
• Discharge pipe material: Santoprene;
• Power supply: 220V + / - 10%.